BRCGS 7.4.2 Protective Footwear: Shoe Covers for Food Factories

BRCGS updated clause 7.4.2 in August 2026, and supplier pages are already reading the change as a rule that every site must issue shoe covers. It does not say that. This article sets out what the clause actually requires, where disposable covers legitimately fit, and how many pairs a plant gets through in a year.

At a glance

Item Detail
Clause BRCGS Food Safety Issue 9, 7.4.2 (protective clothing)
Change Protective clothing must now include suitable protective footwear where needed to prevent product contamination
In force Audits since 10 August 2026
Source BRCGS document F926, version 4, dated 27 April 2026 — Position Statement 4
Zone rules unchanged Clause 8.4.1: high-risk / high-care footwear must be dedicated, visually distinctive, and controlled at entry
Consumption benchmark 2–3 pairs per person per shift, issued per entry to the production area

CPE shoe cover worn over a shoe, showing the elastic opening

What actually changed on 10 August 2026

BRCGS issued version 4 of its Issue 9 position statements (document F926) on 27 April 2026, and the changes have applied to audits since 10 August 2026. One of them is new rather than editorial: Position Statement 4 amends clause 7.4.2 so that protective clothing now explicitly includes suitable protective footwear, where needed to prevent product contamination. The same amendment names snoods for beards and moustaches.

Two things follow from this, and most supplier pages get both wrong.

First, it is not a new universal rule that every site must issue shoe covers. The wording is “where needed”, which means the site’s risk assessment decides. A plant running fully enclosed lines, with product never exposed, may document a justification for no protective footwear at all — and that justification is what the auditor will look at.

Second, the change matters less on the factory floor than in the document pack. Sites that already control footwear by zone do not need to buy anything. What they now need is a written basis for the footwear decision, held alongside the overalls and hairnet rules, referenced in the personal protective clothing procedure, and covered in training records. If an auditor asks “why this footwear here” and the answer is “we have always done it this way”, the new clause gives them a firmer hook than they had in 2025.

One timing point is worth knowing before you write anything into a procedure. Issue 10 is in development and is expected in 2027, with no audit start date announced. Clause numbering may shift with it, so treat 7.4.2 as the current reference rather than a permanent one.

Shoe covers are not a substitute for dedicated footwear in a high-care area

Clause 8.4.1 already set the stricter rules for high-risk and high-care areas, and those rules did not change. Footwear there has to be dedicated to the area, visually distinct from what is worn elsewhere, and controlled at the entrance by a physical barrier or bench system, or a boot wash that is shown to work, with environmental monitoring to confirm the control holds.

A disposable film cover worn over outdoor shoes does not meet that standard. It is not dedicated to the area, because the outdoor shoe travels inside it, past the barrier. On a thin 2.5–3.5 g cover it can tear at the elastic during a shift, and a torn cover is a foreign-body risk that has to be caught by the wearer, not by metal detection.

Where covers do legitimately sit:

  • Access points for people without site footwear.Visitors, contractors, auditors, drivers and maintenance crews. This is the largest and least contested use — a CPE shoe cover on roll suits a reception or gatehouse where a dispenser sits beside the sign-in desk.
  • Low-risk and enclosed-product areas, where the risk assessment asks for a barrier against what is walked in, not a zone-segregation control.
  • A second layer over dedicated footwear, where a site’s own risk assessment calls for extra protection at a specific step — typically a wet or high-soil process.

That reframing changes what you buy. If covers are bought to satisfy an auditor, buyers tend to chase the cheapest film. If they are bought for visitor access and low-risk entry, the specification that matters is tear resistance at the elastic, and whether the cover stays on for a full visit rather than three steps down a corridor.

How many pairs a plant actually uses

The number buyers most often get wrong is the annual quantity, because it is driven by entries rather than headcount. Across the food factories we supply, the working figure is 2–3 pairs per person per shift, issued each time someone re-enters the production area — not one pair per shift.

At 2.5 pairs per person-shift:

Person-shifts per day Pairs per day Cartons per month (1,000 pairs/carton) One MOQ of 100 cartons covers
50 125 ~4 ~26 months
100 250 ~8 ~13 months
200 500 ~15 ~7 months
400 1,000 ~30 ~3 months

 

Machine-made covers packed at 2,000 pairs per carton halve the carton count and double the coverage time on the same table.

The practical consequence is that for most plants under 200 person-shifts a day, one minimum order is six months to two years of stock. That makes the buying decision a storage decision, not a monthly reorder. Before approving a purchase order, ask for carton dimensions, stack height, and a shelf-life statement — film covers stored in a warm, humid warehouse will not behave the same at month eighteen as they did at month one.

Five specifications that change the outcome

Weight per pair. Machine-made covers run 2.5–3.5 g; hand-made covers run 3.0–5.0 g. The heavier film resists tearing at the elastic, which matters when the same person is donning a cover two or three times a shift. At a 2–3 per shift rate, one tear per person per day is a 30–50% increase in consumption — often more than the price difference.

Machine-made CPE shoe cover weighed on a digital scale

Length. A 40 × 15 cm cover covers a shoe, not an ankle. If the risk assessment requires ankle coverage, this size will not deliver it and a longer leg cover is the correct product — for example our short LDPE boot covers at 40 × 29 cm. Say so in the specification rather than discovering it at the audit.

A 40 × 15 cm CPE shoe cover and a 40 × 29 cm LDPE boot cover on the same pair of shoes, side view

Elastic construction. Hand-made covers use a circular elastic welded around the opening; machine-made covers use a single flat elastic, ultrasonically welded. The circular elastic grips more evenly and holds better through repeated donning and removal.

Circular elastic cuff on a hand-made CPE shoe cover beside the single flat elastic of a machine-made cover

Colour. Clause 8.4.1 asks for footwear that is visually distinct between zones. Pick a colour that cannot be confused with the product on the line or with low-risk footwear. Blue is the common choice in food plants because it is rare in food itself.

Anti-slip. Relevant here — unlike in farm and outdoor use — because food factory floors are smooth and often wet: tiles, epoxy, stainless drainage areas. Specify it for wet processing and wash-down zones; skip it for dry packing halls.

Embossed anti-slip texture on the sole of a disposable CPE shoe cover

What to ask your supplier for

  • EU 10/2011 Declaration of Conformity.European suppliers do issue DoCs for CPE overshoes, treating them as plastic food contact material. Since 16 September 2026 the declaration has had to reflect Regulation (EU) 10/2011 as amended by (EU) 2025/351, which tightened purity requirements and labelling. A DoC dated before that amendment is worth questioning.
  • FDA food-contact documentationif you ship to the United States.
  • AQL and inspection level, stated on the order rather than agreed verbally.
  • Carton count, carton dimensions and shelf life.
  • The supplier’s own BRCGS certificate and its scope.“We are BRCGS certified” is not the same as “the scope covers this product category” — check the scope statement, not just the logo. Ours are listed on the certificates page.

FAQ

Does BRCGS require disposable shoe covers?

No. Clause 7.4.2 requires suitable protective footwear where needed to prevent product contamination, as determined by the site’s risk assessment. Covers are one way to control access points; dedicated footwear is another.

Can shoe covers be the only footwear control in a high-care area?

No. Clause 8.4.1 requires dedicated, visually distinct footwear with entry control by a barrier or bench system, or a validated boot wash. A disposable cover over outdoor shoes does not satisfy that.

How many pairs should we budget per person?

2–3 per person per shift is the working figure in plants that issue by entry, not per shift. Budget by entries, then check the number against your own door counter for a week.

Do CPE shoe covers need an EU 10/2011 DoC?

Ask for one. It is standard practice among European suppliers for overshoes, and since 16 September 2026 the declaration has had to reference the 2025/351 amendment.

Where to go next

If the footwear decision sits next to the rest of your personal protective clothing, the same logic applies to disposable aprons and gowns — the material choice follows the zone, not the price list.

This article summarises publicly available BRCGS material for procurement planning. It is not certification advice — always check the current BRCGS standard text and your certification body’s guidance. Clause numbers refer to BRCGS Food Safety Issue 9 and its position statements as published in 2026.

Bitoor manufactures CPE shoe covers in 40 × 15 cm, hand-made at 3.0 / 5.0 g and machine-made at 2.5 / 3.5 g, packed 1,000 / 2,000 pairs per carton (1,600 for roll format), minimum order 100 cartons, 30-day lead time. Most of the range is produced in blue, the colour food plants ask for most often, and an EU 10/2011 Declaration of Conformity is issued with the shipping documents. Certificates are listed on our certificates page.

Our site certification is BRCGS Packaging Materials at Higher Level. That is the packaging standard, not Food Safety — worth checking against your own supplier approval criteria before you use it as audit evidence.

Whichever way your site documents the decision, the specification is the part you can fix now. Tell us the size, weight and packing you need, and we will reply within 24 hours with pricing, a sample and the EU 10/2011 Declaration of Conformity. Request a quote

 

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *