Disposable CPE Shoe Cover Machine Made
| Item | Specification |
| Product name | Disposable CPE Shoe Cover, machine made |
| Also called | Machine made shoe cover, CPE overshoe, disposable indoor shoe cover |
| Material | Cast polyethylene (CPE) film, single use |
| Size | 40 x 15 cm, one adult size |
| Weight | 1.5 – 3.0 g per piece; 2.5 g standard |
| Top | Single flat elastic, ultrasonic welded |
| Shape | Square cover, welded on four sides |
| Seams | Heat welded, watertight |
| Colour | White, blue |
| Packing | 100 pcs per bag, 20 bags per carton (2,000 pcs per carton) |
| MOQ | 100 cartons |
| Lead time | About 30 days after deposit |
Specifications
This is the machine made CPE shoe cover: 40 x 15 cm, square, a single flat elastic top, 2,000 to a carton.
It is the cheapest cover we make, and the reason is not a corner cut — it is throughput. A machine runs the top on in one pass, so the cover comes off the line at a speed and a cost that hand fitting cannot match.
Made by Machine, and Priced for It
The top is a single flat elastic band, welded on by ultrasonic. One pass, no hand work, thousands an hour. That is where the price comes from.
What the machine cannot do is tension the opening the way a cord does. A flat band grips where it is welded; a round elastic fitted by hand pulls all the way around. On a cover worn for minutes that difference does not show. On a cover worn for a shift it does — which is why the hand made version exists next to this one.
Weight runs 1.5 to 3.0 g. 1.5 g is the thinnest film we run and it is fine for a doorway; 2.5 g is the standard order; 3.0 g is for a floor that scuffs.
Where It Belongs
- Viewings, show houses and open days— handed out at the door, off at the mat.
- Reception, meeting rooms and showrooms— visitors who walk ten metres, not ten hours.
- Cleanroom and laboratory entry— the short crossing where the cover is a barrier for a minute.
- Catering, events and site visits— high volume, short wear, thrown away at the end.
What it is not for is a full shift. If the cover has to survive eight hours of walking, the shoe shaped 40 x 29 cm cover is built for that — foot shaped and taller than the ankle — and the hand made CPE cover is the version with the round elastic top.
Size, Packing and Ordering
40 x 15 cm, white or blue, 1.5 to 3.0 g. Packing is 100 pieces to a bag, 20 bags to a carton — 2,000 to a carton, which is why this is the cover bought by the pallet for entrances and events.
Minimum order is 100 cartons, about 30 days from deposit. The knee high range starts at the boot cover hub; for wet hard floors take the anti-slip non-woven cover instead.
Send the weight, the colour and the quantity to request a quote and we will confirm the packing and the price.
Frequently Asked Questions
What is the difference between this and the hand made cover?
The top and the price. Hand made uses round elastic welded in by hand, which tensions the whole opening and costs more; this one is a flat band run on by machine. Same 40 x 15 cm size, same film.
Can it be worn for a whole day?
It is made for short wear. For a full shift use the shoe shaped cover, which stays on because of the shape rather than the elastic.
Is 1.5 g too thin?
For a doorway and an indoor floor, no — that is what it is for. If the floor is rough or the walk is long, take 2.5 or 3.0 g.










