Disposable LDPE boot cover with elastic top

Item Specification
Product name Disposable LDPE Boot Cover with Elastic Top
Also called Disposable boot cover, disposable overshoe, wellington cover, knee high shoe cover
Material Low density polyethylene (LDPE) blown film, single use
Size 40 cm length x 50 cm height (knee high)
Thickness 40 – 100 micron
Top Double round elastic, hand made – two bands welded at the same position
Seams Side seams heat welded, watertight; bottom welded as standard, un-welded on request
Surface Smooth or deep embossed
Colour Clear, blue, pink
Types in the range Adult long (this page), adult short, child
Packing 10 pcs per roll, 5 rolls per bag, 10 bags per carton (500 pcs per carton)
Customisable Size, thickness, colour, embossing, printing, packing, bottom seam
MOQ 100 cartons
Lead time About 30 days after deposit

Specifications

These disposable LDPE boot covers are the plain cover in the range. A knee high film bag with an elastic top, 500 pcs to a carton, put on at the door and thrown away at the next one.

They are not the toughest cover we make and not the lowest cost way to keep a boot dry — but on mud, slurry and wet grass they are the cover that behaves best, because nothing sticks to the film and nothing soaks into it.

This page is the hub for the range. Sizes, thickness, packing and ordering terms below apply across it, and the tie, short, printed, CPE and anti-slip versions each have their own page, linked where they come up.

What “LDPE Boot Cover” Means

LDPE is low density polyethylene. The film is blown: resin is melted, inflated into a bubble, cooled and wound flat. Blowing stretches the film in two directions, so it comes out soft and slightly elastic rather than stiff and flat like the cast film behind our CPE shoe cover.

What matters on a boot cover is that the film is closed and non-absorbent. Mud, slurry and manure water have nothing to grip and nothing to soak into, so they run off and the cover keeps its weight. A fabric or non-woven cover wets through, gets heavy and starts to sag around the ankle — which is the failure farmers describe as “it filled up”.

The trade-off is honest. The film does not breathe, and it is not armoured: a sharp stone or a thorn will go through 40 micron. That is why the range runs to 100 micron and why we ask what the ground is like before quoting a thickness.

Double Elastic and Welded Seams

The top carries two round elastic bands at the same position, one above the other, both welded into the hem. Two bands, two reasons. Double tension holds the cover at the calf instead of letting it work down, and if one band gives way the second still holds the cover up.

Round elastic is fitted by hand; the machine made construction uses a single flat band welded on by ultrasonic. Round elastic is the more expensive of the two and it is what the whole boot cover range is built on, because it grips evenly all the way round instead of only where a flat weld sits.

The side seam is heat welded, not stitched. No needle holes, no thread to wick water along, so the seam does not leak. The bottom is welded as standard and can be supplied un-welded on request — that is a production decision, so it has to be settled on the order, not on stock goods.

Size, Height and Thickness

50 cm of height puts the top at the calf, which is the part that collects splash in a footbath, a milking pit or a wet yard. The 40 cm length is the foot, so the cover sits over a work boot without bunching at the toe. The short version, 40 x 29 cm, stops at the ankle — the right cover for a changing room bench or a show house, where nobody walks through anything deeper than a doormat.

A child size is available and is quoted with the printed boot cover. One adult size fits the usual range of work boots and wellingtons; if your team wears very large boots, tell us the boot and we will confirm the fit before you order.

  • 40 micron— indoor transitions, visitor use, one short walk. The lightest cover in the range that still behaves like a cover.
  • 60 to 80 micron— yards, alleys, gravel, mud, repeated stepping in and out. What most farm and food plant orders settle on.
  • 100 micron— rough ground, longer wear, where stones and thorns are the problem rather than water.

Thickness is film gauge, not weight per pair, so two suppliers quoting “heavy duty” can be 30 micron apart. Ask for a sample of each gauge you are considering and walk the same route in both; the difference shows up in the sole within a hundred metres.

Where They Are Used

  • Dairy and pig units— parlour, footbath, calf pens, slurry alleys, the route between the clean and dirty sides. Mud and wash-down water, every day, all winter.
  • Veterinary and insemination work— a barrier that comes off at the door. Paired with the insemination glove, the job is covered head to boot.
  • Food processing and catering— wash-down areas, changing rooms, hygiene barriers between raw and ready-to-eat zones.
  • Show houses, viewings and building sites— a buyer through a finished house without a trail behind them, often handed out with a CPE isolation gown at the same door.
  • Gardening, landscaping and light industry— potting, planting, moving between beds and paving.
  • Rainy day retail and school— the printed and child sizes are sold for exactly this.

Boot Cover, Shoe Cover, Tie or Anti-Slip

Five covers sit in this corner of the range. They overlap, but each one has a job it does better than the others.

  • Elastic top (this page)— the general purpose cover. Mud, rain, yards, fields, and a fast change at the door.
  • Tie version— same film and size, two tapes instead of elastic. Slower to put on, but it can be drawn tight over a bulky wellington and it does not lose tension in storage.
  • Short version— 40 x 29 cm, ankle height. Indoor transitions only.
  • CPE shoe cover— thinner, cheaper, a closer fit for indoor and cleanroom entry.
  • Anti-slip non-woven cover— a dotted sole for wet hard floors. When the floor is glazed tile or polished epoxy and someone is carrying something, this is the one that stays under the foot.

The one surface this page is wrong for is a smooth wet indoor floor. LDPE film is smooth, so on wet tile it slides, and no gauge of it changes that. Mud and rain are the easy case — mud is what it handles best.

Packing and Ordering

Standard packing is 10 pieces to a roll, 5 rolls to a bag, 10 bags to a carton — 50 to a bag, 500 to a carton. The roll is the practical part: a hook by the door, and the next pair pulls off without opening a bag of loose covers.

Minimum order is 100 cartons, with about 30 days from deposit. OEM covers the range: size, gauge, colour, surface, elastic or tie, welded or un-welded bottom, inner packing and carton print. Printed covers are quoted separately because print run, colour count and minimum quantity differ from plain stock — that sits on the logo printing page.

Send the ground the covers will be used on, the gauge, the top type, the packing and the quantity to request a quote and we will come back with the specification, the packing layout and the price. Samples of two or three gauges are the fastest way to settle it.

Frequently Asked Questions

Are these boot covers fully waterproof?

Yes. The film does not absorb water and the side seams are heat welded rather than stitched, so there are no needle holes to leak through. They are not meant for standing in water above the ankle for long periods — for that you need a rubber boot, not a cover.

Do they stay up in deep mud?

Yes, and that is what the double elastic is for. Two round bands at the same position hold the top at the calf with twice the tension of a single band, and if one breaks the other still holds. Boot covers are hand made with round elastic across the whole range.

Will they slip on a wet floor?

On mud, grass, gravel and wet concrete, no — mud is the surface this cover handles best. On a smooth wet indoor floor such as glazed tile or polished epoxy, yes, the film will slide. Use the anti-slip non-woven cover indoors instead.

What is the difference between the elastic and the tie version?

Only the top. Same film, same 40 x 50 cm size, same packing. Elastic is faster to put on; the tie version tightens over a bulky boot and holds better in wind. For most farm orders the elastic top is the one that gets used, because speed at the door matters more than a perfect fit.

Watch below video to see the water proof test: