Types of Disposable Aprons: Which One for Which Job
At a glance
| Type | Material and weight | Main user | Change rhythm |
|---|---|---|---|
| PE apron, flat pack | PE film, 6–50 g | Restaurants, general single use | Single use |
| PE apron, single folded | PE film, 6–20 g, food contact grade | Hospitals, care homes, restaurants | Single use, one piece at a time |
| CPE apron, deep embossed | Cast PE, 10–40 g | Restaurant kitchens, food processing | One shift or more |
| Meal apron with sticker | PE film, 8–20 g, adhesive neck | Care homes, residents who cannot dress themselves | Single use |
| EVA apron | EVA film, 60–120 g, chlorine-free | Fish markets, seafood processing | Reusable, wipes down |
| Non-woven apron | 25 gsm non-woven, 72 × 40 cm | Barbecue, light oil and water splatter | Single use |
| Apron with long sleeves | PE film, 25–55 g | Hospitals mainly; anywhere arms need covering | Single use |
The gram figure tells you more than the material name
Every apron below is sold as a “disposable apron”, and the phrase hides an eightfold spread in material. A plain PE apron runs from 6 g to 50 g per piece. At 6 g it is a sheet you throw away after one service. At 50 g it is a garment. Both are polyethylene, both are waterproof, and they are not the same purchase.
So before comparing quotes, compare grams. If one supplier is far cheaper for “PE aprons”, the gram figure is usually where the difference sits — not in the labour or the freight.
The same logic runs the other way. Our EVA apron weighs 60–120 g and is designed to be wiped down and worn again. It is sold through disposable-product channels, but calling it a disposable apron is misleading, and buyers who treat it as one over-order badly.
Tensile strength and elongation: why each apron suits its job
Two figures decide whether an apron survives the job it is bought for: how hard you have to pull before the film tears (tensile strength, in newtons) and how far it stretches before it breaks (elongation at break, in per cent). Both are measured on a strip of film rather than on a finished apron, so they can be compared between suppliers — unlike “thick” or “heavy duty”, which mean nothing until someone states the grams.
| Apron | Film and weight | Tensile (N) | Elongation (%) | What that means on the job |
|---|---|---|---|---|
| PE apron, flat or single folded | PE film, 6–50 g | 1–2 | 200–300 | Stretches far under light force; fails at a snag, not at a spill |
| CPE apron, deep embossed | Cast PE, 10–40 g | 3–5 | 300–500 | Ties pull tight without tearing; folds all shift without splitting |
| EVA apron | EVA film, 60–120 g | 6–12 | 300–600 | Deforms around a fin, a shell edge or a knife point instead of parting |
| Apron with long sleeves | PE 25–55 g, or CPE | same as its film | same as its film | No separate figure of its own — read the row that matches the film |
| Non-woven apron | 25 gsm fibre web | not quoted | not quoted | Sold by gsm and absorbency; tensile is the wrong test for it |

At 1–2 N a PE apron is built to be pulled, not loaded. The 200–300% elongation is what lets a 6 g sheet wrap a body without splitting at the hip, and it is why the film feels forgiving in the hand. What it will not take is a point load — a tray corner, a cutlery handle, a door latch. That single property is the reason PE belongs in front-of-house service and meal feeding, where the apron meets spills and nothing sharp, and the reason it does not belong in a fish hall.
Doubling both figures moves the apron from one service to one shift. At 3–5 N and 300–500%, the ties can be pulled tight at the back without the eyelet tearing out, and the film can crease at the waist a few hundred times without starting a split. That is the figure that makes CPE economic in a kitchen: you pay two or three times as much per piece and wear one instead of eight.
At 6–12 N the apron stops being a cover and becomes a barrier against something. With 300–600% elongation the film deforms around a shellfish edge or a fin instead of parting at it, and the higher force is what holds that deformation without a tear running. This is the property that keeps an EVA apron in a fish market for weeks — and the reason a heavier PE sheet is not a substitute: adding grams raises the force a little, it does not change how the film behaves at a point.
Non-woven is quoted differently here, and we do not put a tensile figure on it. It is a fibre web sold by gsm, judged on how much oil and water it takes up rather than on how far it stretches. A tensile number for a bib tells you very little about what it does over a grill.
The long-sleeve apron has no figure of its own either. It is the same film as the body — PE at 25–55 g behaves like the PE apron, and a CPE version behaves like the CPE apron — with the sleeve simply carried on from the same pattern. If you are comparing a PE sleeve apron against a CPE one, compare them on the two rows above, not on the fact that they have sleeves.
All of the figures above are typical values from our own film, measured on a film strip. They are not a guaranteed minimum for a batch, and the strip width and test speed should be stated alongside them before two suppliers’ numbers are set side by side. If your line runs a receiving test, ask for the tensile and elongation record with each shipment and set your accept limit against it.
Seven aprons, seven jobs
Restaurant service: the cheapest PE apron
6–20 g film, two ties at the back, front coverage only. There is nothing clever here and there shouldn’t be — the apron exists to be worn for one service and binned. Buy on price per piece, then on packing convenience: a roll at the pass is easier to live with than a box in a storeroom.
Sizes run 117 × 69 cm up to 140 × 78 cm, in clear, blue, white or pink.
Hospital, care home, restaurant: the single folded apron
The single folded apron uses the same 6–20 g film, just dispensed differently. Each piece is folded so that one comes out at a time and your hand does not go back into the pack. That is the entire argument for it, and it is a hygiene argument rather than a material one — which is why the price difference against a flat pack is usually worth paying in a clinical setting and rarely worth paying in a kitchen.
Packing runs 50 or 70 pieces per box for the Japan-style box, or one piece per bag with 50 bags per box for export.
Kitchen and food processing: CPE, deep embossed
Our CPE apron is 10–40 g cast film with a deep emboss on the surface. The emboss does two practical things: it keeps the folded apron from sticking to itself when your hands are wet, and it stops the film lying flat and clinging to clothing once it is on.
This is the one type where a single apron is expected to survive a shift. In a kitchen that plates continuously, that changes the annual quantity by an order of magnitude compared with a 6 g sheet.
Care homes: the sticker apron
The sticker apron is 8–20 g PE with a self-adhesive neck sticker instead of ties. The reason to buy this is not cost, it is the wearer: a carer can put it on a resident who cannot tie anything behind their back, and set the neck line by pressing the sticker where it needs to sit. Ties are simply the wrong fastener for that job.
Packing is single folded, 50 pieces per box, 20 boxes per carton.
Fish markets and seafood processing: EVA
60–120 g, chlorine-free, sold as a replacement for PVC and TPU aprons. It resists fish fins, shellfish edges and knife points, wipes down, and does not harden or crack.
The failure mode in a fish hall is worth stating plainly: a thin PE apron does not usually fail because water gets through, it fails because something sharp goes through it. That is why the answer there is a heavy reusable apron and not a thicker PE sheet.
Barbecue and oil splatter: non-woven
The non-woven apron is 25 gsm, 72 × 40 cm, with a neck loop. Non-woven absorbs oil and water rather than shedding it — the opposite of what you want over a wash-down sink, and exactly what you want where the hazard is spatter from a grill.
Note the size. 72 × 40 cm is a bib, not a full-body apron, and buyers ordering “aprons” for a full shift of cooking are often surprised by it. A PE-coated version is available, with an absorbent face and a liquid-blocking back.
Full arm coverage: the apron with long sleeves
The long-sleeve apron is 25–55 g PE, open back with ties and a neck loop, finished with either a thumb hole or an elastic cuff.
The naming here is genuinely a mess, and it is worth saying so. This product is sold as an apron with long sleeves, a PE gown, an apron gown and a sleeves apron; in Japan it is simply called a gown. Buyers also reach for “isolation gown” for it, although isolation gowns are usually a separate CPE product with a different back and cuff finish.
The only way through it is the specification: check weight, wrist finish and back closure, and ignore the name on the quote. If you need arm coverage and a waterproof front, this is the product; if you need a closed back and a specific cuff, you are probably looking at a different line.
One shift or one use
| Where it goes | Typical weight | How long one lasts | What drives the annual quantity |
|---|---|---|---|
| Restaurant service, front of house | 6–20 g PE | One service | Covers served |
| Care home, resident feeding | 8–20 g PE sticker | One meal | Meals served |
| Barbecue, grill station | 25 gsm non-woven | One session | Sessions, not hours |
| Kitchen, food processing | 10–40 g CPE | A shift or more | Staff × shifts |
| Fish market, seafood plant | 60–120 g EVA | Weeks, washed between uses | Number of wearers, not uses |
That table is the reason two sites of the same size can have completely different apron budgets. A kitchen running CPE counts shifts. A restaurant running 6 g PE counts covers. The same headcount produces numbers that differ by an order of magnitude.
Four ways buyers pick the wrong one
- Buying “PE apron” on price without checking grams. 6 g and 50 g are both PE, and one is eight times the material.
- Using a non-woven bib over a wash-down area. It absorbs; that is its purpose at a grill and the wrong property at a sink.
- Using thin PE in a fish hall. Fins and shells puncture it. That is an EVA job.
- Ordering sticker aprons for staff who can tie. You pay more per piece for a feature nobody needs.
What to confirm before the order
- Gram per piece, not just the material name
- Size in cm, and whether it is given as length × width
- Fastening: ties, sticker, or neck loop
- Packing format: flat, single folded, on roll, or one per bag
- Whether you need a food contact declaration for the film
FAQ
What is the difference between a PE and a CPE apron?
PE is blown film, CPE is cast. CPE is denser, takes a deep emboss, and is normally sold heavier — 10–40 g — for shift-long wear. PE covers the 6–20 g single-use end.
Can an EVA apron be reused?
Yes. At 60–120 g it is the one type here designed to be wiped down and worn again, which is why it is sold as a replacement for PVC and TPU rather than as a cheap sheet.
Is a non-woven apron waterproof?
No. It absorbs oil and water. If you need splatter absorption and a dry back, ask for the PE-coated version.
Is an apron with long sleeves the same as an isolation gown?
Often sold under that name, but check the specification. Isolation gowns are usually CPE with a closed back and a different cuff, while the long-sleeve apron is PE with an open back and ties.
Where to go next
If you are torn between two weights, the fastest way to settle it is a sample rather than a spec sheet. Tell us the gram, size and packing you need and we will send a piece to test against your own job.
Bitoor manufactures disposable aprons in PE, CPE, EVA and non-woven, packed flat, single folded or on roll, minimum order 100 cartons, about 30 days after deposit, FOB Shanghai. Certificates are listed on our certificates page.
Sizes, weights and packing in this article are taken from our current product specifications. Confirm against your own requirement before ordering — a 72 × 40 cm bib and a 140 × 78 cm apron are both sold as “aprons”.


Leave a Reply
Want to join the discussion?Feel free to contribute!